Wide range of lightbox applications provides the right lighting for every lightbox, without unwanted shadows.

Very powerful egde-lit and backlit modules for the lightbox

Powerful and energy-efficient LED display spotlights, which can be mounted on any stand construction system

Pendant spotlights for every stand construction system

Up to 26.000 lumens for illumination of the entire stand

Assortment of track lights for a 3-phase track system suitable for use in stand construction

Wide range of LED recessed spotlights ideal for use in stand construction

The ERON 200 is an extremely powerful floodlight that is used to illuminate the entire stand from a great height. Very high light output up to 26,000 lumens.

For the VICI, UVAL and YONI Exposupply also has the necessary connection cables available in two sizes, 75 and 150 cm.

For the VICI, UVAL and LONY Exposupply also has the necessary connection cables available in two sizes, 75 and 150 cm.

Connection Cable Lightbox 3 pins - 150 cm

Exposupply has developed transport boxes for 8 lamps per box for all types of display spots. This way you can transport your spots safely and easily.

For the VICI, UVAL and YONY Exposupply also has the necessary connection cables available in two sizes, 75 and 150 cm.

The design of the LUMI LED display spotlight can be perfectly combined with any style. This 30W lamp has a light output of up to 3700 lumens. The lamp is suitable for installation at standard stand height.

LAL-030-G3B_Product data sheet.pdf

LAL-030-G3B-W_Product data sheet.pdf

LAL-030-G4B_Product data sheet.pdf

LAL-030-G4B-W_Product data sheet.pdf

LAL-030-G6B_Product data sheet.pdf

LAL-030-G6B-W_Product data sheet.pdf

Lumi 30W.dxf

Lumi 30W.3ds

Lumi 30W.dwg

Lumi 30W.skp

The META provides a good and wide illumination and has a light output of up to 2750 lumens. An external adapter powers the display spot.

LAM-025-G3E Product data sheet.pdf

LAM-025-G4E_Product data sheet.pdf

LAM-025-G6E Product data sheet.pdf

META 25W.3ds

META 25W.dxf

META 25W.skp

META 25W.dwg

The powerful NOVI 50 display spot provides a light output of up to 5000 lumens. This lamp is therefore suitable for installation at a height of approx. 5 meters.

LAN-50-G3B_Product data sheet.pdf

LAN-50-G3B-W_Product data sheet.pdf

LAN-50-G4B Product data sheet.pdf

LAN-50-G4B-W_Product data sheet.pdf

LAN-50-G6B_Product data sheet.pdf

LAN-50-G6B-W_Product data sheet.pdf

NOVI 50W.dxf

NOVI 50W.3ds

NOVI 50W.dwg

NOVI 50W.skp

For the NOVI 70W display spots Exposupply has developed a transport box for 5 lamps per box. This allows you to transport your spots safely and easily. Including lid. There is also space in the box for clips and cables.

The slim and classic META display spot provides a wide distribution of light. The 25 watts produce a light output of up to 2750 lumens. The lamp is suitable for placement up to a stand height of ±250cm.

LAM-025-G3B_Product data sheet.pdf

LAM-025-G3B-W Product data sheet.pdf

LAM-025-G4B_Product data sheet.pdf

LAM-025-G4B-W_Product data sheet.pdf

LAM-025-G6B_Product data sheet.pdf

LAM-025-G6B-W_Product data sheet.pdf

HDF floor panels with any desired image. Ideal dimensions of 1000 x 1000 x 10 mm. The sides of the panel are fitted with a groove. The MDF strips connecting the panels are provided as standard.

The Safety cable Saveking® 3mm is standard equipped with a second quick link, according to DIN 56927 nominal size (NG) 5B code B140.

The cable complies with DIN 12385-4 Table 12 Cable class 6x19M with a plastic core with a nominal strength of 1.770 N / mm2.

The minimum breaking load (MBK) is 4.89 kN.

This white round 40 Watt recessed spotlight has a diameter of 195mm and is only 120mm thick. The powerful 40W Samsung LEDs give a light output of up to 3800 lumens. The beam has a beam angle of 60˚. 

This large 40W rail spotlight is easy to integrate into a three-phase rail system. Its rotatability offers maximum flexibility with 350° rotation in combination with a tilt angle of 180°. The lamp gives a light output of up to 4200 lumens.

Deze ronde 20 Watt inbouwspot is slechts 70mm dik en is makkelijk en onopvallend in te bouwen. De ROBI geeft een lichtopbrengst tot 1800 lumen. De lichtbundel heeft een stralingshoek van 60˚. 

This black spotlight is easy to attach on a truss or wall. The powerful 150W LEDs provide a light output of up to 15,000 lumens. The beam has a round beam angle of ±75°. 

Elegant spotlight for your 3-phase rail system. 28 W with a light output of 3100 lumens. Easy to hang and with built-in Philips adapter.

This 200 W black PAR light gives a light output up to 24,000 lumens. The lamp has a stable colour performance and high colour rendering. The beam has a beam angle of ±23˚ / Field 42.

HDF floor or wall panels in large sizes. Just like ExpoFloor panels, the sides of the panel are fitted with a groove and the sides are spraypainted in colour. Available up to 3 meters in size.

Sleek and compact floodlight to illuminate the entire exhibition stand. This floodlight is equipped with barndoors. The RENO has a light output of up to 18,000 lumens.

Reno 150W.dxf

Reno 150W.skp

Reno 150W.3ds

Reno 150W.dwg

UVAL is the solution for your light box. Available with 5 LEDs (15 Watt) for a light output of 1350 lumens, or a short module with 3 LEDs (9 Watt). In order to secure heat conduction the strips can be placed in an aluminium frame.

Sleek and compact floodlight to illuminate the entire exhibition stand. The RENO is equipped with barndoors and can easily be mounted on a truss system. The RENO 75 has a light output of up to 9,000 lumens.

RENO 75W.dxf

RENO 75W.3ds

RENO 75W.skp

RENO 75W.dwg

Illuminate your lightbox with the powerful 6500k VICI edgelit modules. Equipped with 9 conical lenses (27 Watt) for a light output of 2700 lumens, or a short module with 3 conical lenses (9 Watt) for 900 lumens. Available with 2-pin and 3-pin versions.

This white round 10W recessed spot has a 

diameter of 110mm and is only 32.5mm thick. The recessed spotlight is easy and discreet to install thanks to the flat finishing plate.

This white rectangular recessed spotlight in 30 or 60 Watt is only 115mm thick. The 30W gives a light output of up to 3000 lumens. The 60W gives up to 6000 lumens. The beam angle is 100 degrees. 

HDF wall panels with specific dimensions for Aluvision and beMatrix systems. One side of the panel is in high gloss and the other side in matte.

Most powerful 6 or 12 Watt backlight lit. With a light output of 600 or 1200 lumens and 7000 K.

For use on the back of your one-sided lightbox.

This round 20 W recessed spotlight has a diameter of only 120mm. The powerful 20W Citizen COB LEDs give a light output of up to 1700 lumens. The beam angle is 24 ˚. 

Most powerful display spot available. Applied at stand height of 7 meters. Ideal for banner lighting.

Product data sheet NOVI 70 LAN-70-G6B-W.pdf

Product data sheet NOVI 70 LAN-70-G6B.pdf

Product data sheet NOVI 70 LAN-70-G4B-W.pdf

Product data sheet NOVI 70 LAN-70-G4B.pdf

NOVI 70W SKP_2018.skp

NOVI 70W.dxf

NOVI 70W.3ds

NOVI 70W.dwg

HDF floor panels in any desired RAL-colour. Ideal dimensions of 1000 x 1000 x 10 mm. The sides of the panel are fitted with a groove. The MDF strips connecting the panels are provided as standard.

Black or white HDF floor panels. Ideal dimensions of 1000 x 1000 x 10 mm. The sides of the panel are fitted with a groove. The MDF strips connecting the panels are provided as standard.

Attach the display spot easily and quickly to an Octanorm system with the Clip Octanorm. Two different Octanorm clips are available.

With the Clip Panel the display spot can easily be placed on a wall panel with a thickness of 22 mm. 

Diffuse panel for RENO floodlight. Using strong magnets, the Diffuse panel is clicked in front of the lens of the RENO floodlight and an even light is diffused.

Exposupply has its own range of cables available for connecting the various display spots. Available in 150, 200 and 300 cm.

Diffuse panel for RENO floodlight. Using strong magnets, the Diffuse panel is clicked in front of the lens of the RENO floodlight creating a uniform spread of the light.

We also offer a 120W driver for our extensive range of lightbox modules.

We also offer a 240W driver for our extensive range of lightbox modules.

Exposupply has its own range of cables available for connecting the various display spots. 

Exposupply has its own range of cables available for connecting the various display spots. Available in 150 or 200 cm.

We also offer a 75W driver for our extensive range of lightbox modules.

Exposupply has its own range of cables available for connecting the various display spots. Both in Wieland and IEC version.

The display spotlight can be screwed onto any wooden wall panel using the Clip Custom.

Using the Truss Hook, the display spot can be mounted on a standard truss of 30 cm.

Using the Truss Hook, the display spot can be mounted on a standard truss of 40 cm.

With the Clip Panel the display spot can easily be placed on a wall panel with a thickness of 19 mm. 

With the Clip Panel the display spot can easily be placed on a wall panel with a thickness of 16 mm. 

The easiest way to attach your lamp to the truss. The Easy Truss Clamp has a width of 30mm and is suitable for all common truss systems with tubes of 48-51mm.

Voor de VICI, UVAL en LONY heeft ExpoSupply ook de benodigde verbindingskabels beschikbaar in twee maten, zowel voor de 2- als de 3- pins uitvoeringen.

With the Clip Pipe Clamp the display spot can be attached to a round tube or on a straight wall. The maximum thickness is 50mm.

With the Clip Modul/Syma the display spot can easily be mounted on an aluminum wall profile of Modul or Syma or similar profiles.

Connection cable duo for VICU and UVAL. This cable connects on one side the output of the driver and on the other side two outputs for the connection of the lightbox modules.

By using the Clip Angle, the angle of the display spot can be adjusted so that the arm is completely horizontal.

Indien u kiest voor de Displayspots met Wieland uitgang dan heeft ExpoSupply hiervoor ook powerkabels met een lengte van 200 cm beschikbaar.

With the aluminium Aluvision/beMatrix clip, the display spot can easily be placed on an aluminium wall profile of the modular systems Aluvision or beMatrix.

On the catwalk exhibiting fashion is of course the most important thing. But the setting in which that happens is just as important. The use of ExpoFloor floor panels with high-gloss lacquer ensures an exclusive character of the fashion show. Floor panels in white, in colour or with a print make for an unforgettable experience.

Create a high-end catwalk with high gloss panels

Fashion shows

Related developments

Example projects ExpoFloor

Floor panels with your own print

Stay informed by subscribing to our newsletter on trends, knowlegde & innovation!